TOPDON BT100
$191,11
Contact Us on WhatsApp
Specification
| Dimensions | 18 × 10 × 3,5 cm |
|---|
Description
Product Description
Check Your Battery Before It Dies
A Minor Investment Saves You from Headache
Were you sitting in the car and wondering why you can’t start the car? The cause of this may be a flat battery.
Try this 12V car battery tester, so you can:
- Avoid failed cold-weather starting, and a roadside breakdown.
- Keep a close eye on battery status, and fix potential problems.
- Regular battery check to lengthen its lifespan; make sure it works at an optimum level.
- Save mechanic costs and many more.
TOPDON BT100 What can TOPDON BT100 do?
- Wide Battery Coverage: works for 100 to 2000CCA regular flooded, AGM flat plate, AGM spiral, Gel, and EFB;
- Multiple Unit Systems: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
- Battery Health Test Result: SOH (state of health), SOC (state of charge), CCA value, voltage, internal resistance, etc.
- Cranking/Starting Test: predict if the battery will fail to crank/start a vehicle.
- Charging Test: helps determine if the output voltage of the generator, the rectifier diode, and the charging current is normal.
- 3-LED Indicators: easy to tell if battery’s good (Green), there’s a warning (Orange), or there’s a serious issue (Red).
- Convenient Test: support both in-vehicle and out-of-vehicle test; no need to remove the battery out of vehicle.
- Built-In Protection: polarity reverses connection protection with spark proof; no heat generated while operating, or cause battery discharge.
- Easy & Quick Operation: show concise suggestions in seconds (Good, Bad, Recharge, Replace), with menu buttons to navigate easily.
- Multilingual Menu: English, Russian, Spanish, French, Italian, German.
- Note: For load test, please connect the product to your car and ignite the car on.
TOPDON BT100 Cranking Test
If your battery is 4 or more years older, and it does not seem to crank your engine at a normal speed, you probably need a new battery.
This 12V battery tester can show you the cranking voltage, and the cranking time in milliseconds, to help predict if the battery will fail to crank/start the vehicle.
Loaded Voltage means the voltage measured when turning on on-board electrical appliances, such as headlights.
Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances.
TOPDON BT100 Charging Test
Use this battery load tester to check if the generator provides sufficient power to the vehicle electrical system, and if the battery can hold the charge.
More data are also included: CCA value/rating, voltage, internal resistance, state of health (SOH), and state of charge.
State of health (SoH) is a figure of merit of the condition of a battery (or a cell, or a battery pack), compared to its ideal conditions.
TOPDON BT100 Show Battery Health
This automotive alternator tester will display test results: “GOOD, BAD, REPLACE, or RECHARGE”, concise and easy to understand for your quick reference.
- GOOD BATTERY: Battery is in good condition, no worries!
- GOOD, CHARGING: Good battery but low voltage, charge before using.
- REPLACE: Battery almost reaches the end of the using life, please replace it for car running.
- BAD CELL, REPLACE: REPLACE: Battery is interior damaged, bad cell or short circuit, replace it.
- RETEST AFTER CHARGING: Low voltage, charge and retest to avoid error.
In / Out of Vehicle
This car battery tester has a fast scan time to run a battery system test to check battery overall health, and the status of your alternator and battery.
TOPDON BT100 Stay Safe Always
The risk of causing damage tends towards zero when using this load tester.
At the end of the durable cable are larger-sized clamps than the competition for a more secure fit.
TOPDON BT100 Easy Battery Tester
This entry-level auto battery analyzer is made for newbies, with helpful features such as extra-large clamps for a solid connection, intelligent LED status indicators for quick test, and 5 large keypad buttons that make the menu easy to scroll.
**Move off the clamps and wait for 2 minutes to do another test.
2 Test Methods
- In Vehicle – no need to remove the battery. You can directly check the vehicle battery under the hood.
- Out of Vehicle – can test the independent battery.
Can Work in Hot & Cold
You live in someplace where the weather is harsh? Then you need this durable car battery tester, which can stand the extreme cold and heat (operation temp. range: -4℉~140℉, -20℃~65℃).
6 Languages Support
This BT100 battery tester can be used by people from different parts of the world, as it is multilingual. For users who are not English speakers, they can easily switch the function menu into Russian, Spanish, French, Italian, and German.
Based on 0 reviews
Be the first to review “TOPDON BT100”
Related products
-
Diagnostic Tools, Topdon, Topdon Diagnostic Tool
Topdon Phoenix Remote
TOPDON Phoenix Remote is an automotive diagnostic scanner with extensive coverage of over 200 passenger cars and new energy vehicle models.
Featuring Remote Diagnosis, this tool offers unprecedented insight and convenience. This functionality enables real-time communication between smart tools without space constraints and leverages OE-level functions – making it a game-changing device for repair shops.
The Phoenix Remote provides unprecedented coverage with its MDCI, an expanded VCI equipped with the latest protocols: CAN2.0, CAN FD, DoIP, J2534 (only for Remote Access programming), D-PDU, and RP1210. It also offers a variety of advanced functions and crucial features, such as Cloud-based Programming, Coding, and FCA Secure Gateway Access.
Manual for Topdon products : Link
2 Years of Free Software Upgrades / 1 Year Warranty
SKU: IM-002 -
Diagnostic Tools, Topdon, Topdon Diagnostic Tool
Topdon Phoenix Lite 2
TOPDON Phoenix Lite 2 OBD2 Scanner | Full System Diagnostics | Online Coding | Bi-Directional Control | 35+ Maintenance Services | AutoVIN Function | Bluetooth Wireless VCI | FCA Gateway Access | BTMobile Pros Compatibility | Remote Technical Support
Phoenix Lite 2 is TOPDON’s new compact pro-level scan tool. This tool is designed to be streamlined and deployable. When technicians have jobs outside the shop or jobs that need to be resolved fast, the Phoenix Lite 2 is up to the task.
With a robust array of special functions, online coding, and broad vehicle coverage, this versatile scan tool clears up jobs faster and gets shops moving. Generate the most complete diagnostic reports with advanced scanning functions and Bluetooth battery testing compatibility. Do more in less time with the Phoenix Lite 2.
Manual for Topdon products : Link
2 Years of Free Software Upgrades / 1 Year Warranty
SKU: IM-005
There are no reviews yet.